Project RATROD...AKA...LOWRIDER. ...new pics--->11-17-08

This forum is for the discussion of general Isuzu related information

Moderator: Staff

Project RATROD...AKA...LOWRIDER. ...new pics--->11-17-08

Postby Bansil » Thu Feb 14, 2008 7:31 am

Ok just some pics and mods lots left to do,I'm just finishing up lots of projects that piled up in my building during the "BEE season" :lol:

Oops after relocating radiator to bury the winch into front end
Image
Forgot about little things like the radiator clamp :roll:

so out with old and in with new
Image

Mounted
Image

radiator moved back 2" shows fuses for relays
Image


Hoodpins since I cut so much radiator support away,hood wouldn't always open.
Image

latest bling 8)
A switch panel that will mount on the rollcage infront of and above heater controls.Winch control,in/out. 3 light switches for front,2 for fans,rev light and interior light.I had to move alot of crap since the cage takes up so much room.
Image

and yes that is a sea turtle swimming above sea grass.........

got's ta represent TEAM TURTLE

Image

Front bumper that gained over 3" of front clearance over stock bumper
Image

There will be lot's of updates and pics.
Last edited by Bansil on Mon Nov 17, 2008 1:48 pm, edited 23 times in total.
La Tortuga...the bus
http://www.skoolie.net/forum/viewtopic.php?f=9&t=12570
The Turtles' site
http://www.cardomain.com/ride/505863/1998-isuzu-rodeo/
My Amigo build "Lowrider"
viewtopic.php?f=1&t=18800&hilit=lowrider


nfpgasmask wrote: I think it looks like a robot penis, but then again, I have a sick mind.

:) Bart
User avatar
Bansil
I am the Stig
 
Posts: 4823
Joined: Sun Oct 17, 2004 8:13 am
Location: Under an ISUZU in east TN......
Has thanked: 3 times
Have thanks: 69 times

Sponsor
 

Postby Cronk » Thu Feb 14, 2008 8:29 am

lookin good man!
Cronk
Subscriber
 
Posts: 6859
Joined: Sun Dec 18, 2005 3:41 am
Location: Kokomo, Indiana
Has thanked: 123 times
Have thanks: 93 times

Postby Smiley » Thu Feb 14, 2008 10:38 am

Dat's right...
33s and FLAT A-arms! :twisted:


Doug, allow me to be the first to say it...
MORE PIX!!!

:wink:


Cheers!
Smiley
"I don't know what you're painting that drive shaft for... It's not like anyone's ever gonna see it" ~ Joe Berry (BigPoppa) circa 2004
"Needs more Cow Bell!" :lol:

~ 1999 Isuzu VehiCROSS..... "The VX" ~ 912s | Indy4x HD Tie Rods [>SOLD<]
~ 1998 Acura SLX................ 'The Chariot of the Goddess' ~ bone stock
~ 1998 Isuzu Amigo S......... "Bruiser" ~ MUA5 | 3"+ 3" | 912s | Nitrochargers | 33x12.50s | Lockright [>SOLD<]
~ 1998 Isuzu Rodeo S......... "Old #6" ~ 912s | Bilstein 5100s (f) / Nitrochargers (r) | 32x11.50s | 3.07s | very nicely ARB'd, Indy4x'd, and DOR'd [>SOLD<]
~ 1997 Isuzu Rodeo S......... "THUD" ~ MUA5 | 3"+ 3" | 3.07s | OME HD Leaf Springs | MWM Rock Bars | Yellow 1-pc. Drive Shaft [> SOLD <]
~ 1995 Isuzu Trooper S....... "Heart of Gold" ~ MUA5 | 912s + 1" Spacer | 3.07s | 5.38s | 35x12.50s | ARB Bumper | Snorkel | Infinite Improbability Drive

ALL OF THEM for less than the cost of one brand new SUV.............................. PRICELESS!
User avatar
Smiley
Forum Admin
 
Posts: 3580
Joined: Thu Jul 03, 2003 10:48 am
Location: BFE, WV
Has thanked: 26 times
Have thanks: 6 times

Postby RodeoRed » Thu Feb 14, 2008 11:05 am

wow - nice front bumper.... think something like that would work with my winch mount???
(Former owner of a) '99 Rodeo 3.2 V6 A/T w/ 8" lift, 4.77's, Aussie Locked Rear
33" TrXus MT's, trailgear sliders, pacer flares
CB, superwinch 8000 lb & custom bumper,ProComp lights, custom rack, dents...
http://www.cardomain.com/ride/2231794
User avatar
RodeoRed
I am the Stig
 
Posts: 5831
Joined: Thu Dec 09, 2004 10:21 pm
Location: montreal
Has thanked: 0 time
Have thanks: 4 times

Postby Bansil » Thu Feb 14, 2008 11:08 am

I'll post more pics either tomorrow or tuesday morning.

No it wouldn't exactly work for you,I'll post side pics and you'll see why.I tucked that thing way in,the headlights stick out further than most of the bumper.
La Tortuga...the bus
http://www.skoolie.net/forum/viewtopic.php?f=9&t=12570
The Turtles' site
http://www.cardomain.com/ride/505863/1998-isuzu-rodeo/
My Amigo build "Lowrider"
viewtopic.php?f=1&t=18800&hilit=lowrider


nfpgasmask wrote: I think it looks like a robot penis, but then again, I have a sick mind.

:) Bart
User avatar
Bansil
I am the Stig
 
Posts: 4823
Joined: Sun Oct 17, 2004 8:13 am
Location: Under an ISUZU in east TN......
Has thanked: 3 times
Have thanks: 69 times

Postby RubyTrooper » Thu Feb 14, 2008 11:28 am

Most excellent getting that winch tucked in soooo tight. Image Yeah, I'm waiting for more photos also. Image
Isuzu Trooper, '91, 2.8L, RAS'd & SAS'd, TeraLows, 5.38s etc.

Ohhhhh NOOOOooo!!! Ruby is for SALE!!! '91 Isuzu Trooper - Coil Sprung SAS

Funkyzeit mit Ruby
User avatar
RubyTrooper
Mud King
 
Posts: 425
Joined: Mon Oct 04, 2004 5:21 am
Location: Portland, OR
Has thanked: 0 time
Have thanks: 1 time

Postby reran » Thu Feb 14, 2008 2:30 pm

Sweet. That switch panel is so cool. More pics.
"As slowly as possible, as fast as necessary."

"Do what you can, with what you have, where you are." Theodore Roosevelt

89 Trooper, 2.6L Turbo, AW 30-80LE
94 Trooper SE, 3.2 DOHC, 69k miles
User avatar
reran
Zu Royalty
 
Posts: 1696
Joined: Sun Dec 18, 2005 10:13 am
Location: Roswell, GA
Has thanked: 11 times
Have thanks: 29 times

Postby UNDERDOG » Thu Feb 14, 2008 4:32 pm

Totally dig the switch bracket!!! Image
Who did the laser cutting? You?

MORE PICS!!!!
Jake
Real men like it dirty!
ImageImageImageImageImageImage
User avatar
UNDERDOG
Zu Royalty
 
Posts: 1530
Joined: Sat Oct 23, 2004 11:11 am
Location: PORTLAND, OREGON
Has thanked: 0 time
Have thanks: 0 time

Postby Starchild » Fri Feb 15, 2008 12:00 am

I love the switch panel Doug. Let's see it in place.

Andre
1994 Trooper - Delightfully close to stock
User avatar
Starchild
Zu Royalty
 
Posts: 1434
Joined: Tue Oct 14, 2003 11:08 pm
Location: Fernandina Beach, FL
Has thanked: 0 time
Have thanks: 1 time

Postby MarkB.NV » Fri Feb 15, 2008 1:53 am

When you installed the lectric fans, did you put the relays in with the lead pointed up?
Last edited by MarkB.NV on Sat Oct 14, 2017 3:46 pm, edited 1 time in total.
MarkB.NV,

Black 1989 RS, 2,6 / 5 speed, 149K mi.
Tan 1986 Trooper, 2.6 / 5 speed, 173K mi.

Sold ... White 1984 Trooper, 1.9 / 4 speed
Sold ... Silver 1990 Trooper, 4 cyl, 5 speed
Sold ... Blue 1989 Trooper, 4 cyl, 5 speed
User avatar
MarkB.NV
Almost Joe Isuzu
 
Posts: 2352
Joined: Sun Jun 24, 2007 4:34 pm
Location: Folsom CA
Has thanked: 83 times
Have thanks: 145 times

Postby Smiley » Fri Feb 15, 2008 7:24 am

Doug -- all this time, you've been trying to tell me what tires you're running, when all you had to say was...

Image

'They're the Blair Witch Tires' :twisted: :lol:


I would LOVE to see a list of all of the previous owners of those M/Ts... It would probably read like a 'Who's-Who' of Planet Isuzoo! 8)



Photo-wise, for a start, I'm sure we would all like to see some pix of the Roll Cage (* Yes, I know you're not finished with it... get over it -- no one is going to complain if it isn't perfect yet :P ), as well as some flexed-out shots of that 3/4 rear spring set-up 8)


Cheers!
Smiley
"I don't know what you're painting that drive shaft for... It's not like anyone's ever gonna see it" ~ Joe Berry (BigPoppa) circa 2004
"Needs more Cow Bell!" :lol:

~ 1999 Isuzu VehiCROSS..... "The VX" ~ 912s | Indy4x HD Tie Rods [>SOLD<]
~ 1998 Acura SLX................ 'The Chariot of the Goddess' ~ bone stock
~ 1998 Isuzu Amigo S......... "Bruiser" ~ MUA5 | 3"+ 3" | 912s | Nitrochargers | 33x12.50s | Lockright [>SOLD<]
~ 1998 Isuzu Rodeo S......... "Old #6" ~ 912s | Bilstein 5100s (f) / Nitrochargers (r) | 32x11.50s | 3.07s | very nicely ARB'd, Indy4x'd, and DOR'd [>SOLD<]
~ 1997 Isuzu Rodeo S......... "THUD" ~ MUA5 | 3"+ 3" | 3.07s | OME HD Leaf Springs | MWM Rock Bars | Yellow 1-pc. Drive Shaft [> SOLD <]
~ 1995 Isuzu Trooper S....... "Heart of Gold" ~ MUA5 | 912s + 1" Spacer | 3.07s | 5.38s | 35x12.50s | ARB Bumper | Snorkel | Infinite Improbability Drive

ALL OF THEM for less than the cost of one brand new SUV.............................. PRICELESS!
User avatar
Smiley
Forum Admin
 
Posts: 3580
Joined: Thu Jul 03, 2003 10:48 am
Location: BFE, WV
Has thanked: 26 times
Have thanks: 6 times

Postby Bansil » Fri Feb 15, 2008 7:33 am

ok you pic ho's

heres some more

People who build truks should not have home improvement store CC's

spray foam does not make a permanent fix for huge rust out's this is what the rockers where made of
Image

it's all good it let me tuck up the skidder,it's not done in this pic since the outer rub rails missing
Image

also ignore what the can says.......bondo will stick to chrome bumpers atleast 1/4" thick :roll:

Image

I took them off,every time I'd back into something they'd squash not letting the tailgate open.......another bumper is in the works.

Apick of the winch tuck
Image

Veiw thru windshield :twisted:
Image

another looking at the dash............and no it's not nearly done yet :P
Image

pick of the traction bar tucked up tight,beside the welded rear this was the best mod to date,no spring rap at all,the rearend is nailed to the graound
front mount:
Image

rear mount:
Image

and sneak peak at the light bar,it'll be mounted low ala TT 8)
Image

You'll notice that alot of the pics look old,that's because it's been wheeled hard this past year.
I'll get more pics up on monday or tuesday.
La Tortuga...the bus
http://www.skoolie.net/forum/viewtopic.php?f=9&t=12570
The Turtles' site
http://www.cardomain.com/ride/505863/1998-isuzu-rodeo/
My Amigo build "Lowrider"
viewtopic.php?f=1&t=18800&hilit=lowrider


nfpgasmask wrote: I think it looks like a robot penis, but then again, I have a sick mind.

:) Bart
User avatar
Bansil
I am the Stig
 
Posts: 4823
Joined: Sun Oct 17, 2004 8:13 am
Location: Under an ISUZU in east TN......
Has thanked: 3 times
Have thanks: 69 times

Postby Bansil » Fri Feb 15, 2008 7:38 am

The switch panel was done by a friend with a plasma table,it will mount on the cage infront of the heater controls,you can see the mounts in cage pic.

The relays are mounted as they look in top pic,If they get water in them there's alot of other problems with connections,they are mounted the way they are for quick diagnostics and replacement,thatnks for insite tho' you are correct.

G-morning Smiley your up early :P
La Tortuga...the bus
http://www.skoolie.net/forum/viewtopic.php?f=9&t=12570
The Turtles' site
http://www.cardomain.com/ride/505863/1998-isuzu-rodeo/
My Amigo build "Lowrider"
viewtopic.php?f=1&t=18800&hilit=lowrider


nfpgasmask wrote: I think it looks like a robot penis, but then again, I have a sick mind.

:) Bart
User avatar
Bansil
I am the Stig
 
Posts: 4823
Joined: Sun Oct 17, 2004 8:13 am
Location: Under an ISUZU in east TN......
Has thanked: 3 times
Have thanks: 69 times

Postby Smiley » Fri Feb 15, 2008 8:14 am

Bansil wrote:G-morning Smiley your up early

See -- I told you that I *can* get up early enough to start racing (even if no one believes me) :P :lol:



Are you sure there's gonna be enough room for Mr. Smiley's long legs? -- That lower cross bar looks like a real shin smacker :shock:


Cheers!
Smiley
"I don't know what you're painting that drive shaft for... It's not like anyone's ever gonna see it" ~ Joe Berry (BigPoppa) circa 2004
"Needs more Cow Bell!" :lol:

~ 1999 Isuzu VehiCROSS..... "The VX" ~ 912s | Indy4x HD Tie Rods [>SOLD<]
~ 1998 Acura SLX................ 'The Chariot of the Goddess' ~ bone stock
~ 1998 Isuzu Amigo S......... "Bruiser" ~ MUA5 | 3"+ 3" | 912s | Nitrochargers | 33x12.50s | Lockright [>SOLD<]
~ 1998 Isuzu Rodeo S......... "Old #6" ~ 912s | Bilstein 5100s (f) / Nitrochargers (r) | 32x11.50s | 3.07s | very nicely ARB'd, Indy4x'd, and DOR'd [>SOLD<]
~ 1997 Isuzu Rodeo S......... "THUD" ~ MUA5 | 3"+ 3" | 3.07s | OME HD Leaf Springs | MWM Rock Bars | Yellow 1-pc. Drive Shaft [> SOLD <]
~ 1995 Isuzu Trooper S....... "Heart of Gold" ~ MUA5 | 912s + 1" Spacer | 3.07s | 5.38s | 35x12.50s | ARB Bumper | Snorkel | Infinite Improbability Drive

ALL OF THEM for less than the cost of one brand new SUV.............................. PRICELESS!
User avatar
Smiley
Forum Admin
 
Posts: 3580
Joined: Thu Jul 03, 2003 10:48 am
Location: BFE, WV
Has thanked: 26 times
Have thanks: 6 times

Postby bigpoppax2 » Fri Feb 15, 2008 8:34 am

No as it looks he needs a horse jockey to ride with him.

I don't envy you trying to build a roll cage, is that as far forward as the front part of the cage will be?

Joe
Good judgment comes from experience, and a lot of that comes from bad judgment.

98 RodeoPort 34" LTB's, Supercharged and some other cool stuff.
User avatar
bigpoppax2
Forum Admin
 
Posts: 7208
Joined: Fri Jan 02, 2004 6:15 pm
Location: Morgantown WV
Has thanked: 0 time
Have thanks: 16 times

Postby Starchild » Fri Feb 15, 2008 8:55 am

I was thinking that Simley will need a helmet and some knee pads for sure!

Looking good Doug!
1994 Trooper - Delightfully close to stock
User avatar
Starchild
Zu Royalty
 
Posts: 1434
Joined: Tue Oct 14, 2003 11:08 pm
Location: Fernandina Beach, FL
Has thanked: 0 time
Have thanks: 1 time

Postby Bansil » Fri Feb 15, 2008 11:08 am

ugh the seats aren't mounted just thrown in there :shock: I take them out to weld etc. then just throw them in to keep the weather and cats off them.

The seats will be mounted 3" lower than stock and back about 6-8" so there won't be much turning your head sideways and looking to the right and left unless I install port holes :P It's not bad tho' even in stock position I have 4" of shin clearance.

as to mounting it much further forward there is a body mount in the way
and I need to be able to weld 360* to the frame.It's not attached and can be easily modified--------still haven't put the "nascar" bars on the side yet.

If bo and luke can get out of a small charger window there shouldn't be much trouble....as for fast.........well.We're old so we'll worry more about 8) .......

It's really not bad just kinda weird with big feet.
La Tortuga...the bus
http://www.skoolie.net/forum/viewtopic.php?f=9&t=12570
The Turtles' site
http://www.cardomain.com/ride/505863/1998-isuzu-rodeo/
My Amigo build "Lowrider"
viewtopic.php?f=1&t=18800&hilit=lowrider


nfpgasmask wrote: I think it looks like a robot penis, but then again, I have a sick mind.

:) Bart
User avatar
Bansil
I am the Stig
 
Posts: 4823
Joined: Sun Oct 17, 2004 8:13 am
Location: Under an ISUZU in east TN......
Has thanked: 3 times
Have thanks: 69 times

Postby Atreyukid51 » Sat Feb 16, 2008 12:01 am

I really need to do your traction bar mod. Cuz I get really bad axle wrap and I have broken the center pin in my leaf springs two times. let me know how you did it.
Don't Take Your Guns To Town - Johnny Cash
http://www.cardomain.com/ride/2196023
Atreyukid51
Drives on Dirt
 
Posts: 54
Joined: Fri Feb 24, 2006 5:58 am
Location: Grants pass,Oregon
Has thanked: 0 time
Have thanks: 0 time

Postby RodeoRed » Sat Feb 16, 2008 12:23 am

Coors Light?!?!?!?1

Us Canadians reserve all light beer for children and the elderly!!! :lol: :D
(Former owner of a) '99 Rodeo 3.2 V6 A/T w/ 8" lift, 4.77's, Aussie Locked Rear
33" TrXus MT's, trailgear sliders, pacer flares
CB, superwinch 8000 lb & custom bumper,ProComp lights, custom rack, dents...
http://www.cardomain.com/ride/2231794
User avatar
RodeoRed
I am the Stig
 
Posts: 5831
Joined: Thu Dec 09, 2004 10:21 pm
Location: montreal
Has thanked: 0 time
Have thanks: 4 times

Postby HeadAutomatica8 » Sat Feb 16, 2008 2:08 am

where did you get your hood pins? mine were from advance auto and rusted to ---- looks BAD i like the hood pins on my 94 just not covered in RUST they are only 3months old not even!!!
22, Ryan, Gardner MA.

(LowZone is an awesome Seller and not a crook! I have made many deals with him with NO issues at all.)

1994 Isuzu Amigo,
4 wheel drive,
2.6L,
5 speed, 31's, Delta Low end Cam. Denso TT plugs, Calmini header into 2.25" exhaust NO cat no EGR, cold air intake. Accel SUPER STOCKER Coil
User avatar
HeadAutomatica8
Zu Royalty
 
Posts: 1079
Joined: Tue Apr 24, 2007 6:32 pm
Location: massachusetts
Has thanked: 0 time
Have thanks: 0 time

Postby onebadtrooper » Sat Feb 16, 2008 2:16 am

Looks sweet man!!!

Anymore info on the green/white trooper??? 8)

Image
89 trooper, 6"lift, 35x13.50R15 baja claws, tera low 3.07's and 5.38's.custom bumper F&R, built 3.4L,safari snorkel.

93 trooper s SOLD..

2001 trooper 3.1L turbo diesel conversion ,yokahama geolander a/t's 265x75r16, ARB bull bar. 2wd to 4wd conversion, rock sliders, ARB roof rack with IPF lights, ARB front locker.
two troopers in a family of isuzu's
User avatar
onebadtrooper
Zu Royalty
 
Posts: 1509
Joined: Wed Feb 15, 2006 12:59 am
Location: Grand Prairie, Texas
Has thanked: 3 times
Have thanks: 4 times

Postby wareagle » Sat Feb 16, 2008 9:28 am

Looks cool. How about a side pic?
Mark - Knoxville, TN 2000 Land Cruiser
ARB bull bar, Warn M8000, Hella 4000 HIDs w/ city light, IPFs, Snorkel, Ironman t-bars, OME 866 coils, 30mm MAF spacers, OME N100/N101 shocks, 285/75/16s ATs, BIO Diff drop, skids, sliders, rear bumper, and safari rack.
.

SOLD>>>95Trooper,fr LockRight,rr LSD,5sp,TeraLow,Indy tierod& QD sway,CO2, RS9000,OME912&2.5"spacer,1"BL,ARB w/Warn M8000,OBT rear bumper&slider

Trooper and Cruiser pics
User avatar
wareagle
Trail Master
 
Posts: 763
Joined: Wed Jun 25, 2003 2:31 pm
Location: Knoxville, TN
Has thanked: 0 time
Have thanks: 1 time

Postby Smiley » Sat Feb 16, 2008 10:18 am

RodeoRed wrote:Coors Light?!?!?!?1

Us Canadians reserve all light beer for children and the elderly!!! :lol: :D

Someone else must've left that bottle there... Doug's a Wino!

:lol:


Cheers!
Smiley
"I don't know what you're painting that drive shaft for... It's not like anyone's ever gonna see it" ~ Joe Berry (BigPoppa) circa 2004
"Needs more Cow Bell!" :lol:

~ 1999 Isuzu VehiCROSS..... "The VX" ~ 912s | Indy4x HD Tie Rods [>SOLD<]
~ 1998 Acura SLX................ 'The Chariot of the Goddess' ~ bone stock
~ 1998 Isuzu Amigo S......... "Bruiser" ~ MUA5 | 3"+ 3" | 912s | Nitrochargers | 33x12.50s | Lockright [>SOLD<]
~ 1998 Isuzu Rodeo S......... "Old #6" ~ 912s | Bilstein 5100s (f) / Nitrochargers (r) | 32x11.50s | 3.07s | very nicely ARB'd, Indy4x'd, and DOR'd [>SOLD<]
~ 1997 Isuzu Rodeo S......... "THUD" ~ MUA5 | 3"+ 3" | 3.07s | OME HD Leaf Springs | MWM Rock Bars | Yellow 1-pc. Drive Shaft [> SOLD <]
~ 1995 Isuzu Trooper S....... "Heart of Gold" ~ MUA5 | 912s + 1" Spacer | 3.07s | 5.38s | 35x12.50s | ARB Bumper | Snorkel | Infinite Improbability Drive

ALL OF THEM for less than the cost of one brand new SUV.............................. PRICELESS!
User avatar
Smiley
Forum Admin
 
Posts: 3580
Joined: Thu Jul 03, 2003 10:48 am
Location: BFE, WV
Has thanked: 26 times
Have thanks: 6 times

Postby Bansil » Mon Feb 18, 2008 7:42 am

Anymore info on the green/white trooper
:roll: ugh ..oops what trooper....... :P ?

The traction bar setup is basically what every leaf sprung rig runs,nothing fancy.What specific ? do you have about it?
La Tortuga...the bus
http://www.skoolie.net/forum/viewtopic.php?f=9&t=12570
The Turtles' site
http://www.cardomain.com/ride/505863/1998-isuzu-rodeo/
My Amigo build "Lowrider"
viewtopic.php?f=1&t=18800&hilit=lowrider


nfpgasmask wrote: I think it looks like a robot penis, but then again, I have a sick mind.

:) Bart
User avatar
Bansil
I am the Stig
 
Posts: 4823
Joined: Sun Oct 17, 2004 8:13 am
Location: Under an ISUZU in east TN......
Has thanked: 3 times
Have thanks: 69 times

Postby Bansil » Mon Feb 18, 2008 4:53 pm

a few more didn't get much done this weekend with weather and all.


view from rear showing Bpillar,there are still 2 pcs missing that will make it a complete X,Those will be last after cage is dropped thru floor for the last time.
Image

A few corner braces
Image

Upper front top brace
Image

Lightbar mockup
Image

Another showing center mount
Image

A sideshot
Image

All for now.......
La Tortuga...the bus
http://www.skoolie.net/forum/viewtopic.php?f=9&t=12570
The Turtles' site
http://www.cardomain.com/ride/505863/1998-isuzu-rodeo/
My Amigo build "Lowrider"
viewtopic.php?f=1&t=18800&hilit=lowrider


nfpgasmask wrote: I think it looks like a robot penis, but then again, I have a sick mind.

:) Bart
User avatar
Bansil
I am the Stig
 
Posts: 4823
Joined: Sun Oct 17, 2004 8:13 am
Location: Under an ISUZU in east TN......
Has thanked: 3 times
Have thanks: 69 times

Next

Who is online

Users browsing this forum: wuhuilin11 and 7 guests