Page 1 of 1

2000 trooper abs and tod code lights

PostPosted: Tue Mar 22, 2011 12:24 am
by joe steele
2000 trooper Put two new split boots on front outer joints. A messy but easy fix. Have a abs code light on and the bottom axle light is blinking with a check light . I guess the bottom axle is the rear. How do I find the code. Won't show on regular scanner, Do i NEED a TECH 2.

PostPosted: Tue Mar 22, 2011 1:04 pm
by TKEPA251
Try a Modis scanner. Most Transmission shops use those

PostPosted: Tue Mar 22, 2011 9:08 pm
by deermagnet
As you know, the ABS, TOD, and airbag codes cannot be read and erased with an OBDII scanner, so here's how you easily do it yourself without a scanner. This is for a '99 Isuzu Vehicross that I posted over at the Vehicross forum. I just checked the '00 Isuzu Trooper Shop Manual and it's exactly the same procedure.

-ABS-
Image
Image
Image

-TOD-
Image
Image
Image

This is a wire that you use to jump the terminals at the data port-
Image

Here's a video I made showing the TOD check light flashing the code.
The code is 12 of course, meaning everything is normal.

5 seconds, 439 kb, wmv file-
http://www.drivehq.com/file/df.aspx/publish/mgpa/vids/tod.wmv

5 seconds, 5.9 mb, mpg file-
http://www.drivehq.com/file/df.aspx/publish/mgpa/vids/tod.mpg


-Airbag-
Image
Image

Mark