Project RATROD...AKA...LOWRIDER. ...new pics--->11-17-08

This forum is for the discussion of general Isuzu related information

Moderator: Staff

Postby Bansil » Tue Mar 25, 2008 6:20 am

lookin pretty sick, man you are doin everything as far as cage that I have been wanting to do.


Thanks :wink:
La Tortuga...the bus
http://www.skoolie.net/forum/viewtopic.php?f=9&t=12570
The Turtles' site
http://www.cardomain.com/ride/505863/1998-isuzu-rodeo/
My Amigo build "Lowrider"
viewtopic.php?f=1&t=18800&hilit=lowrider


nfpgasmask wrote: I think it looks like a robot penis, but then again, I have a sick mind.

:) Bart
User avatar
Bansil
I am the Stig
 
Posts: 4823
Joined: Sun Oct 17, 2004 8:13 am
Location: Under an ISUZU in east TN......
Has thanked: 3 times
Have thanks: 69 times

Sponsor
 

Postby Bansil » Wed Mar 26, 2008 6:28 am

installed two .......oh crap we're doing what handles last night.Had to go with solid mounts since theres just not much room for the one I wanted.


Image

Image

Image

and there's enough room once your inside to enjoy the good life :P
Image

well still gotta figure out how to mount the the rest off the crap.....or that is to find a place for everything without looking like a gypsy wagon :D
La Tortuga...the bus
http://www.skoolie.net/forum/viewtopic.php?f=9&t=12570
The Turtles' site
http://www.cardomain.com/ride/505863/1998-isuzu-rodeo/
My Amigo build "Lowrider"
viewtopic.php?f=1&t=18800&hilit=lowrider


nfpgasmask wrote: I think it looks like a robot penis, but then again, I have a sick mind.

:) Bart
User avatar
Bansil
I am the Stig
 
Posts: 4823
Joined: Sun Oct 17, 2004 8:13 am
Location: Under an ISUZU in east TN......
Has thanked: 3 times
Have thanks: 69 times

Postby isuzufool » Wed Mar 26, 2008 9:56 am

COOL 8) The gloss black paint is going to look really good! :twisted:
'89 pickup, 2.6L with .040 over pistons, MUA5 tranny, calmini header, custom air intake, 2.5" exhaust, 3" lift, stock axles, 33" regal trailblazers, aussie lockers, 217k miles and counting, 80k on engine
'88 Trooper II LS, 2.6L automatic (still a work in progress)
'05 F-150 crew cab 5.4L V-8 with custom exhaust and SCT Livewire tuner/monitor :-)
'00 Rodeo LS, 3.2L automatic

CV shafts are made for breaking, right?
User avatar
isuzufool
Almost Joe Isuzu
 
Posts: 2112
Joined: Thu Jan 10, 2008 7:13 pm
Location: Augusta, Georgia
Has thanked: 0 time
Have thanks: 2 times

Postby Smiley » Wed Mar 26, 2008 12:44 pm

Kewlz... Now I gotz place to hangz awn and screamz O'Shiznit! 8) :lol:


isuzufool wrote:COOL 8) The gloss black paint is going to look really good! :twisted:

Yeah, well... if *I* put that much work into building a cage, it would be painted Blaze Orange, so no one would miss a single detail :twisted:


Cheers!
Smiley
"I don't know what you're painting that drive shaft for... It's not like anyone's ever gonna see it" ~ Joe Berry (BigPoppa) circa 2004
"Needs more Cow Bell!" :lol:

~ 1999 Isuzu VehiCROSS..... "The VX" ~ 912s | Indy4x HD Tie Rods [>SOLD<]
~ 1998 Acura SLX................ 'The Chariot of the Goddess' ~ bone stock
~ 1998 Isuzu Amigo S......... "Bruiser" ~ MUA5 | 3"+ 3" | 912s | Nitrochargers | 33x12.50s | Lockright [>SOLD<]
~ 1998 Isuzu Rodeo S......... "Old #6" ~ 912s | Bilstein 5100s (f) / Nitrochargers (r) | 32x11.50s | 3.07s | very nicely ARB'd, Indy4x'd, and DOR'd [>SOLD<]
~ 1997 Isuzu Rodeo S......... "THUD" ~ MUA5 | 3"+ 3" | 3.07s | OME HD Leaf Springs | MWM Rock Bars | Yellow 1-pc. Drive Shaft [> SOLD <]
~ 1995 Isuzu Trooper S....... "Heart of Gold" ~ MUA5 | 912s + 1" Spacer | 3.07s | 5.38s | 35x12.50s | ARB Bumper | Snorkel | Infinite Improbability Drive

ALL OF THEM for less than the cost of one brand new SUV.............................. PRICELESS!
User avatar
Smiley
Forum Admin
 
Posts: 3580
Joined: Thu Jul 03, 2003 10:48 am
Location: BFE, WV
Has thanked: 26 times
Have thanks: 6 times

Postby Cronk » Fri Mar 28, 2008 8:42 pm

Boy, watching this thread is making me want to drive out to watch the race!

Awsome work man!
Cronk
Subscriber
 
Posts: 6859
Joined: Sun Dec 18, 2005 3:41 am
Location: Kokomo, Indiana
Has thanked: 123 times
Have thanks: 93 times

Postby Van » Sat Mar 29, 2008 12:13 pm

My memory is a little foggy... but if you had some more hair on your head...... you and Smiley could pass as brothers :lol: :lol: :lol:

Excellent job on the build.

Van
Van
Donor
Donor
 
Posts: 1922
Joined: Wed Oct 24, 2007 3:26 pm
Location: GSP, South Carolina
Has thanked: 22 times
Have thanks: 104 times

Postby Smiley » Sat Mar 29, 2008 12:24 pm

Van wrote:......you and Smiley could pass as brothers

Handsome Devils, ain't we? 8) :lol: :lol: :lol: :lol: :lol:


Cheers!
Smiley
"I don't know what you're painting that drive shaft for... It's not like anyone's ever gonna see it" ~ Joe Berry (BigPoppa) circa 2004
"Needs more Cow Bell!" :lol:

~ 1999 Isuzu VehiCROSS..... "The VX" ~ 912s | Indy4x HD Tie Rods [>SOLD<]
~ 1998 Acura SLX................ 'The Chariot of the Goddess' ~ bone stock
~ 1998 Isuzu Amigo S......... "Bruiser" ~ MUA5 | 3"+ 3" | 912s | Nitrochargers | 33x12.50s | Lockright [>SOLD<]
~ 1998 Isuzu Rodeo S......... "Old #6" ~ 912s | Bilstein 5100s (f) / Nitrochargers (r) | 32x11.50s | 3.07s | very nicely ARB'd, Indy4x'd, and DOR'd [>SOLD<]
~ 1997 Isuzu Rodeo S......... "THUD" ~ MUA5 | 3"+ 3" | 3.07s | OME HD Leaf Springs | MWM Rock Bars | Yellow 1-pc. Drive Shaft [> SOLD <]
~ 1995 Isuzu Trooper S....... "Heart of Gold" ~ MUA5 | 912s + 1" Spacer | 3.07s | 5.38s | 35x12.50s | ARB Bumper | Snorkel | Infinite Improbability Drive

ALL OF THEM for less than the cost of one brand new SUV.............................. PRICELESS!
User avatar
Smiley
Forum Admin
 
Posts: 3580
Joined: Thu Jul 03, 2003 10:48 am
Location: BFE, WV
Has thanked: 26 times
Have thanks: 6 times

Postby Zaphod » Sat Mar 29, 2008 2:52 pm

Wow. :o

You guys planning on roving the moon with that thing? :P
2000 Trooper LS
Calmini Cone Filter, Bridgestone Dueler A/T Revo 265/75/16's, Alpine Sound, SuperWinch Hubs, Dashboard Mods
Zaphod
Trail Rider
 
Posts: 280
Joined: Thu Nov 13, 2003 1:38 pm
Has thanked: 0 time
Have thanks: 1 time

Postby ZuCruTrooper2 » Sat Mar 29, 2008 4:59 pm

Mommy, that Amigo scares me...
ZuCruTrooper2
Almost Joe Isuzu
 
Posts: 2905
Joined: Tue Dec 12, 2006 3:39 am
Has thanked: 0 time
Have thanks: 7 times

Postby lorenzo816 » Sun Mar 30, 2008 5:03 pm

Nice work boooy!

I've been off the board for a while and this is SICK! You and Wayne have been busy!!!

I am down for the volunteers list at the UFE Race but it looks like I may just miss all the meetings or at least half of them...so what a crappy vol I am...

It may just work out so that I can Video the Zu Crew and the rigs on the trails.
No promises yet.

I got a DV camera that I can rip the video onto DVD's like butta and then just flip copies like hotcakes.
Now I just got to get that schedule worked out.

maybe I should ask this on the proper thread.... but here goes:
Who's got camping spots out there? .... (edited 3-30-08 ) Found it!!! Number #27

and Smilie:
I love your humor... all i can say is "HOLD ON TIGHT"
1997 Solid Axle Rodeo :: Ar5 swap :: Revo 4Lo :: 5.29/5.36 :: Front OX :: Rear ARB :: Full Float :: Chromoly Bling Bling
Build: 3-link coilover front 44 & rear FZJ80 on 37's
PM me if you need anything - Need a Skull Planet Isuzoo sticker?
User avatar
lorenzo816
I am the Stig
 
Posts: 3726
Joined: Wed Jul 19, 2006 2:36 pm
Location: North Carolina
Has thanked: 115 times
Have thanks: 129 times

Postby Bansil » Mon Mar 31, 2008 6:37 am

:lol: :lol:
heres some more

A few updates,ended up watching way to much tv this weekend,thanks to mother nature.
It rained all day saturday,so nothing happened out side...............

Not all was lost tho'


I made my own window nets because the $20(each) ones didn't even come close to fitting and custom ones are close to $100 each.

The ones I made are strong enough to hang from the rafters,so they will keep arms etc inside the cage.No they aren't SFI rated but they will do the job.

The webbings is 1" wide and ~.09-.125 thick and is UV stable and designed to be used in food and medical feilds.

It was a freebie from work (old project) so once again, keep it green and recycle.

I went ahead and cut the 1" webbing for the window nets as I drank coffee and listened to the rain.

Image


I layed out the pcs on a pc of wood,to keep myself straight and rightside up.

Image


I broke out the sewing machine after momma got up (after I ate brunch)

and started to sew.

The thread I used is for outdoor use and is UV stable and 4x as thick as normal thread.

okey dokey the start of hell has begun,

Image


wow what a PITA!! home machines don't have a deep enough throat,so I was constentally
folding and rolling the net,as I made the square stitching.

Image

ok a few hours later and a bobbin rewind and some very suttle cussing,walla

Image

shown with lower mounting rod installed.


ARRR!!!Maaatttteeyyy

Image

found some pieces of eight-ish on the washer.............gonna have some shiney bling-bling somewhere on lowrider.


ok rest of the day was kinda blah,blah.....painted some on the cage.


Sunday,woke to..............errrrrrrrrrr.........rain.....bad water....bad water...


well after coffee.........it stopped raining!!!!!........now it was snowing...........

oh well,I watched sniper3, it stopped perspiring outside,so the longjohns and multi layers went on.

Dang it was cold and wet,

welded the steering shaft,adapter,extension in place.

Image

Had to loose the turn signal mount because it wouldn't fit over the adapter,and I caught my knee on it so.........sianara????????

wheelmounted

Image


used factory wheel with quick release

Image

then rolled around in the mud and finally fabbed up the B-pillar mounts.
Passenger side and driverside.

Image
Image

I used 1/4" plate for horizontal plates and three pcs of 3/16 to brace it.

not sure why pics are so dark,they looked good at home,sorry.

then came the rain,so inside to watch racing on tv.
La Tortuga...the bus
http://www.skoolie.net/forum/viewtopic.php?f=9&t=12570
The Turtles' site
http://www.cardomain.com/ride/505863/1998-isuzu-rodeo/
My Amigo build "Lowrider"
viewtopic.php?f=1&t=18800&hilit=lowrider


nfpgasmask wrote: I think it looks like a robot penis, but then again, I have a sick mind.

:) Bart
User avatar
Bansil
I am the Stig
 
Posts: 4823
Joined: Sun Oct 17, 2004 8:13 am
Location: Under an ISUZU in east TN......
Has thanked: 3 times
Have thanks: 69 times

Postby Bansil » Mon Mar 31, 2008 6:56 am

I am down for the volunteers list at the UFE Race but it looks like I may just miss all the meetings or at least half of them...so what a crappy vol I am...
8)

stop by and say hi,there will be atleast 5zu's there.
La Tortuga...the bus
http://www.skoolie.net/forum/viewtopic.php?f=9&t=12570
The Turtles' site
http://www.cardomain.com/ride/505863/1998-isuzu-rodeo/
My Amigo build "Lowrider"
viewtopic.php?f=1&t=18800&hilit=lowrider


nfpgasmask wrote: I think it looks like a robot penis, but then again, I have a sick mind.

:) Bart
User avatar
Bansil
I am the Stig
 
Posts: 4823
Joined: Sun Oct 17, 2004 8:13 am
Location: Under an ISUZU in east TN......
Has thanked: 3 times
Have thanks: 69 times

Postby isuzufool » Mon Mar 31, 2008 11:54 am

Cool window nets 8) That does look like it was a HUGE PITA :shock: :shock: But looks awsome!
'89 pickup, 2.6L with .040 over pistons, MUA5 tranny, calmini header, custom air intake, 2.5" exhaust, 3" lift, stock axles, 33" regal trailblazers, aussie lockers, 217k miles and counting, 80k on engine
'88 Trooper II LS, 2.6L automatic (still a work in progress)
'05 F-150 crew cab 5.4L V-8 with custom exhaust and SCT Livewire tuner/monitor :-)
'00 Rodeo LS, 3.2L automatic

CV shafts are made for breaking, right?
User avatar
isuzufool
Almost Joe Isuzu
 
Posts: 2112
Joined: Thu Jan 10, 2008 7:13 pm
Location: Augusta, Georgia
Has thanked: 0 time
Have thanks: 2 times

Postby lorenzo816 » Mon Mar 31, 2008 12:08 pm

isuzufool wrote:Cool window nets 8) That does look like it was a HUGE PITA :shock: :shock: But looks awsome!


X2 - awesome stuff.
1997 Solid Axle Rodeo :: Ar5 swap :: Revo 4Lo :: 5.29/5.36 :: Front OX :: Rear ARB :: Full Float :: Chromoly Bling Bling
Build: 3-link coilover front 44 & rear FZJ80 on 37's
PM me if you need anything - Need a Skull Planet Isuzoo sticker?
User avatar
lorenzo816
I am the Stig
 
Posts: 3726
Joined: Wed Jul 19, 2006 2:36 pm
Location: North Carolina
Has thanked: 115 times
Have thanks: 129 times

Postby Smiley » Mon Mar 31, 2008 11:00 pm

This one goes out to Andre, and awl youz uddah Ol'Skool Brass Monkeys :wink:

Bansil wrote: * Image

*(Non-work-safe audio track link added)



Cheers!
Smiley
"I don't know what you're painting that drive shaft for... It's not like anyone's ever gonna see it" ~ Joe Berry (BigPoppa) circa 2004
"Needs more Cow Bell!" :lol:

~ 1999 Isuzu VehiCROSS..... "The VX" ~ 912s | Indy4x HD Tie Rods [>SOLD<]
~ 1998 Acura SLX................ 'The Chariot of the Goddess' ~ bone stock
~ 1998 Isuzu Amigo S......... "Bruiser" ~ MUA5 | 3"+ 3" | 912s | Nitrochargers | 33x12.50s | Lockright [>SOLD<]
~ 1998 Isuzu Rodeo S......... "Old #6" ~ 912s | Bilstein 5100s (f) / Nitrochargers (r) | 32x11.50s | 3.07s | very nicely ARB'd, Indy4x'd, and DOR'd [>SOLD<]
~ 1997 Isuzu Rodeo S......... "THUD" ~ MUA5 | 3"+ 3" | 3.07s | OME HD Leaf Springs | MWM Rock Bars | Yellow 1-pc. Drive Shaft [> SOLD <]
~ 1995 Isuzu Trooper S....... "Heart of Gold" ~ MUA5 | 912s + 1" Spacer | 3.07s | 5.38s | 35x12.50s | ARB Bumper | Snorkel | Infinite Improbability Drive

ALL OF THEM for less than the cost of one brand new SUV.............................. PRICELESS!
User avatar
Smiley
Forum Admin
 
Posts: 3580
Joined: Thu Jul 03, 2003 10:48 am
Location: BFE, WV
Has thanked: 26 times
Have thanks: 6 times

Postby Tad » Tue Apr 01, 2008 6:41 am

So how long is it going to take your spotter/winch wench to jump out if you get in a bind?

-Tad
[email protected]
https://www.planetisuzoo.com
2001 Trooper - 4.77s, 3xARB, OME 919HD springs. 255x85 Maxxis Bighorn MTs
1999 Rodeo - rebuilt DD
User avatar
Tad
Site Admin
 
Posts: 5577
Joined: Mon Jun 23, 2003 9:02 pm
Location: Wandering Around
Has thanked: 122 times
Have thanks: 98 times

Postby Bansil » Tue Apr 01, 2008 10:04 am

So how long is it going to take your spotter/winch wench to jump out if you get in a bind?


Not sure yet,will know the weekend of the April 12th. :wink:

I can get out in less than 15sec. not trying.And that includes taking the steering wheel off,and simulated window net removing.

Actually 15 sec. is alot of time..........
La Tortuga...the bus
http://www.skoolie.net/forum/viewtopic.php?f=9&t=12570
The Turtles' site
http://www.cardomain.com/ride/505863/1998-isuzu-rodeo/
My Amigo build "Lowrider"
viewtopic.php?f=1&t=18800&hilit=lowrider


nfpgasmask wrote: I think it looks like a robot penis, but then again, I have a sick mind.

:) Bart
User avatar
Bansil
I am the Stig
 
Posts: 4823
Joined: Sun Oct 17, 2004 8:13 am
Location: Under an ISUZU in east TN......
Has thanked: 3 times
Have thanks: 69 times

Postby Smiley » Tue Apr 01, 2008 12:34 pm

I’m still pretty flexible, especially for a 40-something ;) :P


Cheers!
Smiley
"I don't know what you're painting that drive shaft for... It's not like anyone's ever gonna see it" ~ Joe Berry (BigPoppa) circa 2004
"Needs more Cow Bell!" :lol:

~ 1999 Isuzu VehiCROSS..... "The VX" ~ 912s | Indy4x HD Tie Rods [>SOLD<]
~ 1998 Acura SLX................ 'The Chariot of the Goddess' ~ bone stock
~ 1998 Isuzu Amigo S......... "Bruiser" ~ MUA5 | 3"+ 3" | 912s | Nitrochargers | 33x12.50s | Lockright [>SOLD<]
~ 1998 Isuzu Rodeo S......... "Old #6" ~ 912s | Bilstein 5100s (f) / Nitrochargers (r) | 32x11.50s | 3.07s | very nicely ARB'd, Indy4x'd, and DOR'd [>SOLD<]
~ 1997 Isuzu Rodeo S......... "THUD" ~ MUA5 | 3"+ 3" | 3.07s | OME HD Leaf Springs | MWM Rock Bars | Yellow 1-pc. Drive Shaft [> SOLD <]
~ 1995 Isuzu Trooper S....... "Heart of Gold" ~ MUA5 | 912s + 1" Spacer | 3.07s | 5.38s | 35x12.50s | ARB Bumper | Snorkel | Infinite Improbability Drive

ALL OF THEM for less than the cost of one brand new SUV.............................. PRICELESS!
User avatar
Smiley
Forum Admin
 
Posts: 3580
Joined: Thu Jul 03, 2003 10:48 am
Location: BFE, WV
Has thanked: 26 times
Have thanks: 6 times

Postby Starchild » Tue Apr 01, 2008 3:43 pm

Smiley wrote:This one goes out to Andre, and awl youz uddah Ol'Skool Brass Monkeys :wink:



You can't cut the mustard when you're frontin' it all

That sure is some nice pirate booty! :wink:

Thanks for the link Smiley. I haven't been listening to as much B-Boys as I need to 8)

[Chief Wiggam voice] That's some nice sewing work there Doug [Chief Wiggam voice]

The cage tie-ins look good too.

Andre
1994 Trooper - Delightfully close to stock
User avatar
Starchild
Zu Royalty
 
Posts: 1434
Joined: Tue Oct 14, 2003 11:08 pm
Location: Fernandina Beach, FL
Has thanked: 0 time
Have thanks: 1 time

Postby Bansil » Tue Apr 01, 2008 4:11 pm

8) thanks

heres a quick pic......


cutup some old blazer seat belts and started on latches for window nets,used the tig machine at work.

The long pc of 3/16 will be cut down at the home of Lowrider

still gotta get a upper rod cut up...
Image
La Tortuga...the bus
http://www.skoolie.net/forum/viewtopic.php?f=9&t=12570
The Turtles' site
http://www.cardomain.com/ride/505863/1998-isuzu-rodeo/
My Amigo build "Lowrider"
viewtopic.php?f=1&t=18800&hilit=lowrider


nfpgasmask wrote: I think it looks like a robot penis, but then again, I have a sick mind.

:) Bart
User avatar
Bansil
I am the Stig
 
Posts: 4823
Joined: Sun Oct 17, 2004 8:13 am
Location: Under an ISUZU in east TN......
Has thanked: 3 times
Have thanks: 69 times

Postby Bansil » Wed Apr 02, 2008 6:27 am

started on body work this evening,as usual It's easier to cut out rust,dents and bondo.... :twisted:
and I needed to make way for a rear bumper. :wink:

Image

Image

this is what happens when you run out of gas going up a 45*+ hill full of rocks,and you have to roll back to level it out so it'll start again :roll:
ANd the rear bumper-ettes crush and spew forth bondo thus' truck stops as the sheet metal,rust and bondo compact against the tailgate.


so out comes the grinder,sawsall and a BFH...........

Image


It looks better further out will post more pics.

Image

Lost some wght

Image

The cut is level with the top of the frame so the tube won't hang down and it's even with rear of frame and tailgate lines.



Image

passengerside for reference

Image
La Tortuga...the bus
http://www.skoolie.net/forum/viewtopic.php?f=9&t=12570
The Turtles' site
http://www.cardomain.com/ride/505863/1998-isuzu-rodeo/
My Amigo build "Lowrider"
viewtopic.php?f=1&t=18800&hilit=lowrider


nfpgasmask wrote: I think it looks like a robot penis, but then again, I have a sick mind.

:) Bart
User avatar
Bansil
I am the Stig
 
Posts: 4823
Joined: Sun Oct 17, 2004 8:13 am
Location: Under an ISUZU in east TN......
Has thanked: 3 times
Have thanks: 69 times

Postby bigpoppax2 » Wed Apr 02, 2008 8:49 am

I will assume you're going to do a tube bumper? Or is it going to be plate?

I like the added clearance. Looks cool from the back too.

Joe
Good judgment comes from experience, and a lot of that comes from bad judgment.

98 RodeoPort 34" LTB's, Supercharged and some other cool stuff.
User avatar
bigpoppax2
Forum Admin
 
Posts: 7208
Joined: Fri Jan 02, 2004 6:15 pm
Location: Morgantown WV
Has thanked: 0 time
Have thanks: 16 times

Postby Bansil » Wed Apr 02, 2008 10:01 am

yeah tube,gotta cut out the crossmember first to get rid of the rust.It's solid on the ends and the frame is solid,but the middle 16" of the crossmember are rotten.
La Tortuga...the bus
http://www.skoolie.net/forum/viewtopic.php?f=9&t=12570
The Turtles' site
http://www.cardomain.com/ride/505863/1998-isuzu-rodeo/
My Amigo build "Lowrider"
viewtopic.php?f=1&t=18800&hilit=lowrider


nfpgasmask wrote: I think it looks like a robot penis, but then again, I have a sick mind.

:) Bart
User avatar
Bansil
I am the Stig
 
Posts: 4823
Joined: Sun Oct 17, 2004 8:13 am
Location: Under an ISUZU in east TN......
Has thanked: 3 times
Have thanks: 69 times

Postby Smiley » Wed Apr 02, 2008 11:45 am

And as an added benefit, now we can finally see the 3/4 spring set-up! 8)


Man, I can't wait for the 11th/12th -- when I'll be able to take about 250 photos of that Beast -- and maybe even get to drive it :!: :twisted:


Cheers!
Smiley
"I don't know what you're painting that drive shaft for... It's not like anyone's ever gonna see it" ~ Joe Berry (BigPoppa) circa 2004
"Needs more Cow Bell!" :lol:

~ 1999 Isuzu VehiCROSS..... "The VX" ~ 912s | Indy4x HD Tie Rods [>SOLD<]
~ 1998 Acura SLX................ 'The Chariot of the Goddess' ~ bone stock
~ 1998 Isuzu Amigo S......... "Bruiser" ~ MUA5 | 3"+ 3" | 912s | Nitrochargers | 33x12.50s | Lockright [>SOLD<]
~ 1998 Isuzu Rodeo S......... "Old #6" ~ 912s | Bilstein 5100s (f) / Nitrochargers (r) | 32x11.50s | 3.07s | very nicely ARB'd, Indy4x'd, and DOR'd [>SOLD<]
~ 1997 Isuzu Rodeo S......... "THUD" ~ MUA5 | 3"+ 3" | 3.07s | OME HD Leaf Springs | MWM Rock Bars | Yellow 1-pc. Drive Shaft [> SOLD <]
~ 1995 Isuzu Trooper S....... "Heart of Gold" ~ MUA5 | 912s + 1" Spacer | 3.07s | 5.38s | 35x12.50s | ARB Bumper | Snorkel | Infinite Improbability Drive

ALL OF THEM for less than the cost of one brand new SUV.............................. PRICELESS!
User avatar
Smiley
Forum Admin
 
Posts: 3580
Joined: Thu Jul 03, 2003 10:48 am
Location: BFE, WV
Has thanked: 26 times
Have thanks: 6 times

Postby Smiley » Thu Apr 03, 2008 5:32 am

*Beeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeep -- Beep -- Beep -- Beep*



Attention:

This is a Test of the Emergency 'Get Smiley's Butt Outta Bed Early' System...

This is only a Test.



If this were a Real Emergency, about right now, someone would be handing Smiley a 32oz Coffee...

3 Blue Fake Sugars & Heavy on the Non Dairy Creamer.



This concludes this Test of the Emergency 'Get Smiley's Butt Outta Bed Early' System.



We now return you to your regular Internet Surfing, already in progress...



*Beep - Beep - Beep*






:P :lol:


Cheers!
Smiley
"I don't know what you're painting that drive shaft for... It's not like anyone's ever gonna see it" ~ Joe Berry (BigPoppa) circa 2004
"Needs more Cow Bell!" :lol:

~ 1999 Isuzu VehiCROSS..... "The VX" ~ 912s | Indy4x HD Tie Rods [>SOLD<]
~ 1998 Acura SLX................ 'The Chariot of the Goddess' ~ bone stock
~ 1998 Isuzu Amigo S......... "Bruiser" ~ MUA5 | 3"+ 3" | 912s | Nitrochargers | 33x12.50s | Lockright [>SOLD<]
~ 1998 Isuzu Rodeo S......... "Old #6" ~ 912s | Bilstein 5100s (f) / Nitrochargers (r) | 32x11.50s | 3.07s | very nicely ARB'd, Indy4x'd, and DOR'd [>SOLD<]
~ 1997 Isuzu Rodeo S......... "THUD" ~ MUA5 | 3"+ 3" | 3.07s | OME HD Leaf Springs | MWM Rock Bars | Yellow 1-pc. Drive Shaft [> SOLD <]
~ 1995 Isuzu Trooper S....... "Heart of Gold" ~ MUA5 | 912s + 1" Spacer | 3.07s | 5.38s | 35x12.50s | ARB Bumper | Snorkel | Infinite Improbability Drive

ALL OF THEM for less than the cost of one brand new SUV.............................. PRICELESS!
User avatar
Smiley
Forum Admin
 
Posts: 3580
Joined: Thu Jul 03, 2003 10:48 am
Location: BFE, WV
Has thanked: 26 times
Have thanks: 6 times

PreviousNext

Who is online

Users browsing this forum: Ed Mc., wuhuilin11 and 9 guests