Isuzu SUV Forum banner

twilsons 2002 Trooper

51K views 117 replies 15 participants last post by  twilson 
#1 ·
****MY BUILD THREAD. RECENT ON LAST PAGE**
 

Attachments

See less See more
5
#77 ·
Crushed the pumper blowing through some ice this winter. Not to worried about it
 

Attachments

#78 ·
Some New Pics
 

Attachments

#79 ·
Hey Everyone,

Nothing new here. Working, school etc. I'm thinking of getting the trooper painted gloss black. Have a buddy who will do a base clear job (no door jams) for pretty cheap.
Any Thoughts ?
 
#80 ·
Hey Everyone! I haven't been on here lately but today i was driving home, thankfully i was 2 miles from home and i went to shift into 2nd gear, the clutch would not release.
I thought it was stuck or something because it sounded like a smooth shift, so i hit it a few times andstarted heard grinding.
I left it in 2nd gear and just drove home slow.
The throw out bearing went up i guess. So if i find a friend with a lift, I will be replacing the Clutch, Pressure Plate and Throw out bearing. :(
 
#81 ·
We are back up and running. New clutch set installed.
 
#83 ·
1300 for everything. A little pricey but not too bad
 
#85 ·
Okay I appreciate it.
 
#86 ·
Update:
Installed a new Kicker 12" comp sub. Awaiting 4wd Actuator and Solenoid's to fix my 4wd.

tonnydoodles said:
Are you still looking for the 4wd actuator? I have one for sale I'll do for 55 shipped, if you want pics send me your cell and I'll send you some pics.
 

Attachments

#87 ·
Hello Everyone, Happy new year.

I received the 4wd Actuator and Solenoid from tonnydoodles the other day and spent the other day installing both the actuator and solenoid. I then filled the front differential with fluid and was happy the job was completed but as soon as i attempted to engage the 4wd nothing!! I hear it click and everything but it does not lock in. The transfer case works fine i can shift to low / high with no problem. I checked under the driver side door (the thing that looks like a soup can) do not see any rust, lines look good with no corrosion. I'm guessing this has to be a vacuum issue at this point? I checked the vac lines that come off the engine manifold as well as the 2 located near the windshield wipers and they seem tight and clean. Can anyone help me ?

Thank you
 

Attachments

#89 ·
Got some used tires with over 75% tread, all 4 tires for 110$. Pulled out a tractor trailer in four low, I was SHOCKED. Never thought the girl had the power to pull him out.
 

Attachments

#90 ·
New..
 

Attachments

#92 ·
Yup everything works! Goes in and out every time. Ran a vac line from manifold to actuator. It flashes all the time but that's just because the computer thinks its on.
 
#94 ·
The Old Girl and my boat. Amazing how much torque i have in 4 Low coming up the boat ramp.
 

Attachments

#95 ·
Nice! Glad to see you around.
 
#96 ·
Just a few pics, treated my self and bought a go pro.
 

Attachments

#97 ·
Pic .
 
#98 ·
Another Pic
 

Attachments

#99 ·
Picture
 

Attachments

#101 ·
Not the best pic
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top