Planetisuzoo.com

[Stormtrooper]

That's about it. I just need a good source for a factory engine wiring harness and possibly the dashboard wiring harness....

any info would be great!

[m-79_grenadier]

Model? Year?
_________________
-Vince
SASsy trooper

[Stormtrooper]

So sorry. Havta edit my signature! 1988 Isuzu TrooperII LS. 2.6litre fuel injected, 5 speed. 4x4.

[m-79_grenadier]

Try our local Jlemond for it. Hes the one that TYPES IN ALL CAPS. Im sure he'll have one.

If not, try your local stealership. Dont buy a used one either. The reason for getting a new one is usually because the old ones dry up and crack really easiy. Almost every one that Ive found on salvage vehicles have been the same way.
_________________
-Vince
SASsy trooper

[Stormtrooper]

reason I ask, is because I have a odd problem with the check lights in my dash. I replaced the whole alternator assembly so it has been ruled out. But my dash lights stay on all the time, you can barely see it, but they are on really dim. It drives me nuts.

[RockingRobin69]

You don't need a wiring harness. You have a wire going to ground possibly. You need to check all the wires under the dash that provide for dashlights but first, I would look into the headlight switch itself.

Robin...
_________________
1986 Trooper II
2.3, 5-speed, 2-speed t-case
No mods to speak of yet

www.Generation-Edge.info Site owner & Admin.
Creator of the Libby mod

[Jmak]

I have engine harness from a 88 2.6l
$15 mailed
_________________
Now GONE
John 89 LS Trooper 2.6l K&N,DIY heat shield,Calmini cam headers shackels bars cranked,AMC head,Rancho RSXs,2.25 pipes,1 pc D Shaft,Recaro clone seats,Brush guard,Smitty built R bumper,Safari Rack Biggee,31 BFG MT,8.5 wires,blk alloys,de-trimmed,asin hubs